Equipment for the production of fatty products
Emulcon ST-04.1000
The scraper heat exchanger EMULKON is designed to produce various fatty products and feed it directly to the filling and packaging machine. When fed directly to the packaging machine, the product is cooled to low temperatures in order to give the product a hard-plastic consistency. The product can also be fed into the hopper of a filling and packaging machine or into a dispenser in a closed flow
Each heat exchange cylinder has an individual drive, which allows for controlled mechanical processing of the product. The process is organized in three stages: cooling, phase transformation and primary structure formation. Thermo-mechanical processing modes are optimized at all stages of the process, which ensures a higher quality product.
The control panel is equipped with engine overload protection and displays temperature conditions at all stages of processing and the load on the engine of the third cylinder. An automatic oil generator control system is available as an option
The scraper heat exchanger in the mode of continuous packaging of the product is fed to the packaging machine through the holding crystallizer KR-2-01. The appearance of the crystallizer is shown in the figure below
| Показатель | Meaning |
|---|---|
| Product performance : | |
| - with fat mass fraction 82.5% | 1000 кг/час |
| - with fat mass fraction 72.5% | 800 kg/hour |
| Operating mode | continuous |
| Installed power | 31.5 kW |
| Consumption/hour: electricity | 31.5 kW |
| Consumption/hour: cold | 80 kW |
| Dimensions: length | 2660 mm |
| Dimensions: width | 1510 мmmм |
| Габаритные размеры : высота | 1350 mm |
| Weight | 1373 kg |
